SIMPLE, SPACIOUS TREKKING-POLE SHELTER
Designed to be the best double-wall solo shelter supported by trekking poles, the X-Mid is the brainchild of Dan Durston, an experienced thru-hiker and established member of the ultralight community. It aims to solve the common issues seen in trekking-pole-supported tents: Most are single-trekking-pole pyramids, which lack headroom, or overly complex multi-pole designs, which are tedious to pitch. The X-Mid, on the other hand, offers a generous living space (now 30% larger) with dual doors and an easy setup using four stakes and no guylines. All told, it’s simpler, roomier, and more functional than its competitors—and at just 28 ounces, it’s lighter, too.


INNOVATIVE DESIGN, STORM-WORTHY MATERIALS
The X-Mid achieves its impressive specs through an innovative design with a diagonal inner inside a rectangular-based fly. This allows the poles and peaks to be moved inwards from the edges without interfering with doors and living space, eliminating vertical, wind-catching walls and the need for peak guyouts.
The tent is made of 20D polyester with a 3500mm sil/PEU coating. Tested under extreme lab conditions simulating 1.5 months of continuous high winds and heavy rains, the fabric still came out above 1500mm.

PITCHING YOUR TENT
Pitching the X-Mid is similar to pitching a single-pole mid tent. Stake out the rectangle with just one 90-degree angle to guess for the third stake, then insert the two poles. There’s no guesswork with pole locations or pole lengths, because the fly naturally limits the length of the poles. Simply insert them into the grommets and extend until taut.


THE NITTY GRITTY
The peak features 210d black nylon used to form a reinforcing cone, along with a quarter-inch grommet for the trekking pole tip.
Vents consist of overlapping panels of fabric that can be propped apart with a strut.
In tough conditions, the peak guylines can be deployed, along with extra stakes at the eight additional stake points around the perimeter.
The inner uses a unique parallelogram shape to take full advantage of the area inside the fly.
In addition to accommodating even tall hikers, this shape provides protected area for gear storage at both ends.
It also features dual ridgeline pockets, which conveniently hold a headlamp for reading, provide a secure area for valuables, and keep important items in close reach during the night. Finally, the fly uses tough #5 zippers to ensure a long life,
even in tough conditions.


A LEADER IN OUTDOOR GEAR
The X-Mid is made in the epicenter of high-quality outdoor product manufacturing, home to factories that produce tents and apparel for the top brands in the world. The factory that produces the X-Mid also produces some of its top competitors from well-known companies such as MSR and Mountain Hardware, maintaining the highest level of materials sourcing, construction techniques, and testing with all of the tents it produces.
SPECS
- 20 denier 420 thread-count 100-percent polyester in desert sage (fly) or monument grey (floor)
- 3500mm sil/PEU coating
- Peak reinforced with 210d black nylon
- YKK #5 AquaGuard (water-resistant) zippers (fly)
- YKK #3 zippers (inner tent)
- 8 aluminum V stakes
- Fly: 67 x 100 in / 170 x 254 cm
- Fly area: 46.5 sq ft / 4.3 sq m
- Fly peak height: 46 in / 117 cm
- Inner peak height: 43 in / 110 cm
- Floor width: 32 in / 81 cm
- Floor length: 90 in / 230 cm
- Floor area: 20 sq ft / 1.85 sq m
- Vestibule area: 20 sq ft (10 sq ft x 2) / 2 sq m (1 sq m x 2)
- Packed size: 12 x 5 in / 30 x 13 cm
- Fly, including guylines: 17.3 oz / 490 g
- Inner: 10.7 oz / 305 g
- Tent (Fly + inner): 28 oz / 795 g
- Stuff sack: 0.4 oz / 12 g
- Stake sack: 0.2 oz / 4 g
- 4 aluminum V stakes (6 in / 15 cm) @ 10 g
- 4 aluminum V stakes (7 in / 18 cm) @ 12 g
- Complete package: 31.6 oz / 897 g (tent, stuff sacks, 8 stakes)
Materials
Dimensions: Typical Values
Weights
- Ultra-simple four stake pitch
- Tent pitches fly first (inner tent stays dry during rain setup)
- Twin pole structure provides generous living space
- Double-wall design and dual vents protect from condensation
- Dual doors & dual vestibules give easy access/ample gear space
- Protected doorways can be left open in light rain
- Doorways are large and not blocked by trekking poles
- Polyester fabric does not sag in the rain.
- Polyester fabric does not absorb water, so it is fast dry and stays light.
- Interior peak pockets provides handy storage
- Large vents provide excellent ventilation and close easily during harsh conditions.
- Excellent snow shedding via steep roof panels
- Optional peak guylines and side panel guylines plus 8 optional stake points around the base for harsh conditions
- Fly extends to ground to block drafts, can be raised for more ventilation
- Packs short enough to store horizontally in a pack
- Fly and inner can pitch independently
- Magnetic door toggles for quick operation
- Fully Waterproof Seams (Seam Taped or Waterproof Construction)
- Non-slippery floor
- Fully double-stitched construction
- Premium materials and hardware (e.g., YKK AquaGuard Zippers)
- 2-year warranty
- Stuff sack
- 4 aluminum V stakes (6 in / 15 cm)
- 4 aluminum V stakes (7 in / 18 cm)
- Not included: 2 trekking poles or tent poles required for setup
Recommended Trekking Poles: Kaviso x Fizan Compact Trekking Poles
Recommended Tent Poles: Durston Gear Z-Flick (Pair)
Features
Included